Adjustable Drip Irrigation Emitters for 4/7mm Tubing, 50 Pieces

Revised Content:

Utilizing These Emitters Effectively

1. Strategically position the emitter stakes to ensure the plant's root ball remains damp but not waterlogged.

2. Adjust the flow rate for each plant and re-evaluate it every season, considering the plant's growth and changing needs. Tip: Regularly reassess the requirements as the plants evolve.

3. Set a timer to water twice daily, with each session lasting 5 to 10 minutes, tailored to the plant's needs and weather conditions.

4. Test the moisture levels to confirm the water is reaching the intended areas. Tip: Don't assume rain eliminates the need for irrigation, as leaves can divert rainfall away from the roots.

Additional Tips:

1. To make the tubing more manageable, soak it in warm to hot water or expose it to sunlight for a short duration to soften it.
2. When punching holes, hold the hole punch at a right angle to the tubing to ensure a perfect seal around the emitter's barb.
3. Flush the system before installing the emitters to clear any debris.
4. Construct your lateral lines (1/4-inch tubing and emitters) before connecting them to the main line.
5. Always cut the tubing longer than required, as it's easier to trim excess than to find additional lengths if the tubing is cut too short.
6. The emitters farthest from the faucet will need to be set on a freely flowing adjustment due to water pressure loss.

Why Invest in an Automatic Drip Irrigation System for Your Containers or Raised Garden?

Containers tend to dry out quickly, often requiring daily or even twice-daily watering during hot weather. Embracing an automated drip irrigation system can save you the hassle of manually watering your plants. These emitters have proven effective in our vegetable garden and perimeter hedge, eliminating the need to lug around hoses. It's a true time-saver that we should have implemented earlier.

Irrigation Drippers Specifications:

• Total length: 5.2 inches
• Water outlet hole diameter: 0.05 inch
• Irrigation angle: 360 degrees
• Suitable for 4/7mm (Inner/Outer diameter) tubing
• Each dripper has 8 outlet holes at the top

The Irrigation Drippers are made of high-quality plastic and feature a sharp bottom for easy soil insertion. The water flow can be adjusted by rotating the water outlet hole cap, allowing you to customize the amount of water based on the plant's needs, conserve water resources, and save money.

Connection Instructions:

1. Connect directly to the PE pipe.
2. Connect to the 4/7 distribution tubing. Tip: Soften the tube hole with hot water before connecting the tube and dripper.

These drip emitters have a wide range of applications, suitable for pots, tubs, ground cover, landscaped gardens, flower beds, vegetable gardens, herb gardens, greenhouses, orchards, lawns, and more.

product information: